1. Cutting is to cut the shape and size of the whole material
required for crystal embryo pressing with large saw blade at high
speed.
2. Pressing with the required size and shape of mold to produce
finished product, raw material and the high temperature to 900 ℃
above melting, into the mold, die casting
3. After pressing, put the product into a furnace with a
temperature of 600 °C, and slowly cool down after 3 days, so that
the product is harder and the density distribution is more uniform.
We have 2 sets of large cooling machines with a length of 100
meters each to ensure the quality and efficiency of our products.
4. Polishing: the rough embryos pressed out of the mold are
directly grinded into the cutting lines of the finished products
with diamond discs. After rough polishing, the finished products
are polished with polishing powder until they are crystal clear
5. Laser laser produces pictures through 3D or planar plate making,
and USES laser focus to gasify the glass, so that the inside of the
glass presents the specified pattern.
6. Drilling is the process of drilling with a drill bit according
to the size and location of the required drilling before the
completion of the finished crystal.
7. Silk screen crystal surface with different color materials for
effect treatment, the color layer is thicker, focus on the rear can
fall off.
8. The use of similar electroplating techniques in the crystal
surface with different colors, thin layer, friction can scratch,
scratches, because the color is often at the bottom of the color
plating, so often use other objects attached at the bottom of the
color plating, or the use of silver plating technology.
9. Strong three-dimensional carving, high technology, fine
workmanship, high cost.Divided into manual engraving graphics,
machine engraving text.
10. Sandblasting has a weak stereoscopic sense, a relatively flat
sense, and a strong sense of plane vision
The packaging scrubbed the crystal ashtray clean and put it into a
special box. This is a finished product.
